MQB37W Test Bench mini
MQB37W Test Bench mini
Test benchesThe MQB37W Test Bench Mini represents a model of car electronics where all units can be seated and work the same as usual in cars.
This light version of test bench is mainly intended for supporting the development and testing of MIB3 projects.
The advantage of this solution is that tests can be run without the need for an actual car. The MQB37W Test Bench Mini is made of a lightweight aluminium construction. The structure holds a wired harness fixed in a wire duct, which is intended for the connection of ECUs to evaluate technologies and accessories.
The front side of the test bench provides places for the installation of ABT, IC / FPK, and other hardware. The power and data terminals are located on the back side. This provides extensibility to the test bench. Accessories, such as antennas and other items, can be mounted on top of the device.
Thanks to the flexibility of the mechanical design and a suitably designed wiring harness, the test state can be easily modified and extended. Custom modifications are also possible.
Key Features
- Designed and developed with regard to minimize price
- Construction flexibility
- Possibility to connect other units and accessories (from a wiring point of view)
- Prepared for CANSim4 Simulator
- Prepared for TraceBox
- Light and mobile test centre
- Possibility of extension with optional accessories (from a mechanical point of view)
- CAN bus terminal
- Prepared for FrameGrabber 4
- Prepared for Modular FrameGrabber (MGB)
Readiness to Connection
- Gateway (GW)
- Integrated control panel (ABT)
- Body control module (BCM)
- USB-C HUB
- LINDa (roof module)
- Online connectivity unit (OCU3)
- 2x loudspeakers (speakers included)
- Modular infotainment matrix (MIB3)
- Instrument cluster (IC/FPK)
- Multi-function steering wheel (MFL)
- Read coil
- Kopplebox (without antenna)
- Speaker for OCU
- On board diagnostic (OBD II)
Accessories
| Power supply | Switching power supply 0-16 V / 20 A |
| CANSim4 | Simulation of clamp states, speed, RPM, etc. |
| FrameGrabber 4 | A powerful solution for video capturing of multiple video streams e.g. IC, FPK, ABT |
| MGB FrameGrabber | Video capture of IC / FPK, ABT, etc. |
| TraceBox | Modular solution for tracing and logging |
| MFL cable harness | Cable harness for connection of MFL |
| MSG cable harness | Cable harness for connection of the motor control unit |
| ABT holder | Aluminium panel for retrofitting |
| IC / FPK holder | Retrofit kit |
| USB-C HUB holder | Holder for USB-C HUB |
| MFL holder | Holder for multi-function steering wheel to on table (not for fixed mounting on the test bench) |
| Other accessories | Available upon demand |
Technical Parameters
| Supported platform | MQB37W |
| Main purpose | Development and validation of MIB3 |
| Connections | CAN, UART (RS232), OBD II |
| Power supply | 12 V to 15 V |
| Operating temperature | For use in laboratory conditions only |
| Dimensions (W x D x H) | 420 x 410 x 320 mm (including speakers, brackets and DIN rail parts) |
| Weight | 8.95 kg |
On request, we offer individual training and professional consultation with this product. For more information, please contact us.