MQB37W Test Bench mini
Test benches
The MQB37W Test Bench Mini represents a model of car electronics where all units can be seated and work the same as usual in cars.
Product Description
Product Description
This light version of test bench is mainly intended for supporting the development and testing of MIB3 projects.
The advantage of this solution is that tests can be run without the need for an actual car. The MQB37W Test Bench Mini is made of a lightweight aluminium construction. The structure holds a wired harness fixed in a wire duct, which is intended for the connection of ECUs to evaluate technologies and accessories.
The front side of the test bench provides places for the installation of ABT, IC / FPK, and other hardware. The power and data terminals are located on the back side. This provides extensibility to the test bench. Accessories, such as antennas and other items, can be mounted on top of the device.
Thanks to the flexibility of the mechanical design and a suitably designed wiring harness, the test state can be easily modified and extended. Custom modifications are also possible.
The advantage of this solution is that tests can be run without the need for an actual car. The MQB37W Test Bench Mini is made of a lightweight aluminium construction. The structure holds a wired harness fixed in a wire duct, which is intended for the connection of ECUs to evaluate technologies and accessories.
The front side of the test bench provides places for the installation of ABT, IC / FPK, and other hardware. The power and data terminals are located on the back side. This provides extensibility to the test bench. Accessories, such as antennas and other items, can be mounted on top of the device.
Thanks to the flexibility of the mechanical design and a suitably designed wiring harness, the test state can be easily modified and extended. Custom modifications are also possible.
Key Features
- Designed and developed with regard to minimize price
- Light and mobile test centre
- Construction flexibility
- Possibility of extension with optional accessories (from a mechanical point of view)
- Possibility to connect other units and accessories (from a wiring point of view)
- CAN bus terminal
- Prepared for CANSim4 Simulator
- Prepared for MGB FrameGrabber
- Prepared for TraceBox
Readiness to Connection
- Gateway (GW)
- Modular infotainment matrix (MIB3)
- Integrated control panel (ABT)
- Instrument cluster (IC/FPK)
- Body control module (BCM)
- Multi-function steering wheel (MFL)
- USB-C HUB
- Read coil
- LINDa (roof module)
- Kopplebox (without antenna)
- Online connectivity unit (OCU3)
- Speaker for OCU
- 2x loudspeakers (speakers included)
- On board diagnostic (OBD II)
Accessories
| Power supply | Switching power supply 0-16 V / 20 A |
| CANSim4 | Simulation of clamp states, speed, RPM, etc. |
| MGB FrameGrabber | Vdeio capture of IC / FPK, ABT, etc. |
| TraceBox | Modular solution for tracing and logging |
| MFL cable harness | Cable harness for connection of MFL |
| MSG cable harness | Cable harness for connection of the motor control unit |
| ABT holder | Aluminium panel for retrofitting |
| IC / FPK holder | Retrofit kit |
| USB-C HUB holder | Holder for USB HUB |
| MFL holder | Holder for multi-function steering wheel on the table (not for fixed mounting on the test bench) |
| Other accessories | Available upon demand |
Technical Parameters
| Supported platform | MQB37W |
| Main purpose | Development and validation of MIB3 |
| Connections | CAN, UART, (RS232), OBD II |
| Power supply | 12 V to 15 V |
| Operational temperature | For use in laboratory conditions only |
| Dimensions (W x D x H) | 420 x 410 x 320 mm (including speakers, brackets and DIN rail parts) |
| Weight | 8.95 kg |
Leave us message — we will contact you!
Contact form
2024 © By using this website you agree to the use of cookies.
Designed and developed by Freely Agency & H1.cz
Designed and developed by Freely Agency & H1.cz